Collating Copies Into Sets In Page Order (Collate) - Canon CLC5151 Copying And Mail Box Manual

Collating Copies into Sets in Page Order (Collate)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Page
Order (Collate)," on p. 3-37.
IMPORTANT
• The Finishing modes cannot be set if [Envelopes], [Transparencies], [Tracing Paper], [Labels], [Tab
Paper], or [Washi (JPN paper)] is selected as the paper type.
• If Tray B (Copy Tray-M1) is set as the output tray and a finisher is not attached to the machine, copies
are output in the opposite order to the originals, because they are output face-up. Therefore, change the
output tray for the Copy function to Tray A (center output tray) or Tray C (Copy Tray-N1) in Tray
Designation in Common Settings (from the Additional Functions screen). (See Chapter 4, "Customizing
Settings" in the Reference Guide.)
1
Press [Collate].
Press [Collate Not Set] if you do not want to collate the output.
If you want the copies slightly offset vertically in the output tray, press [Offset].
Collate Not Set
Collate
Offset
Making a Copy With the Express Copy Basic Features Screen
7
7-25