Entire Image - Canon CLC5151 Copying And Mail Box Manual

Entire Image

If you are copying an original with an image that extends all the way to the edges onto the same
size paper at a copy ratio of 100%, the periphery of the original image may be cut off slightly on
the copy. However, if you set the Entire Image mode, the image is slightly reduced so that the
entire image is copied without being cut off.
The Entire Image mode should also be set when you want to copy A3 originals onto paper
3
larger than A3 to ensure that the edges of the originals are not cut off. Make sure to place the
originals on the platen glass, and load the stack bypass with 305 mm x 457 mm or 320 mm x
450 mm (SRA3) paper. (See Chapter 2, "Basic Operations," in the Reference Guide and "Paper
Selection," on p. 1-12.)
NOTE
• The Entire Image mode is available for the Copy function only.
• The reduction ratios when the Entire Image mode is specified are:
- A3: 98.1% (A3+ : 100%)
- A4: 97.3%
- A5: 96.2%
• To cancel this setting, press [Copy Ratio]
1
3-16
Changing the Copy (Zoom) Ratio
NOTE
• If the original is placed on the platen glass, the zoom ratio automatically appears when the
feeder/platen cover is closed, provided that the original size can be detected.
• If the original is placed in the feeder, the zoom ratio appears when
Place your originals
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p. 3-10.

[Entire Image].

press [Copy Ratio].
is pressed.