Memory Keys
You can set any possible combination of scan settings, print settings, or copy settings, and then
store them in a memory key. There are nine memory keys, and they can be assigned names for
increased convenience. This feature is useful for storing frequently used scan, print, and copy
settings.
NOTE
The scan, print, and copy settings stored in memory are not erased, even if the power is turned OFF.
Storing Scan/Print/Copy Settings
IMPORTANT
5
You cannot store the Job Block Combination mode in Mode Memory.
Copying
1
2
3
5-4
Memory Keys
Specify the copy settings on the Copy Basic Features screen and/or
Special Features screen.
Press [Special Features]
Select a key ([M1] to [M9]) for storing the settings
[Mode Memory].
press [Register].