Iec 61580 Goose Analog Values; Wattmetric Ground Fault; Phasor Measurement Unit - GE L90 Instruction Manual

6.3 METERING
Table 6–2: FLEXELEMENT™ BASE UNITS (Sheet 2 of 2)
SOURCE VOLTAGE
SYNCHROCHECK
(Max Delta Volts)
PATH: ACTUAL VALUES
IEC 61850
GOOSE ANALOGS
The L90 Line Current Differential System is provided with optional IEC 61850 communications capability.
This feature is specified as a software option at the time of ordering. Refer to the Ordering section of chap-
ter 2 for additional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
PATH: ACTUAL VALUES
6
WATTMETRIC
GROUND FAULT 1
This menu displays the wattmetric zero-sequence directional element operating power values.
PATH: ACTUAL VALUES
PMU 1
6-20
V = maximum nominal primary RMS value of the +IN and –IN inputs
BASE
V = maximum primary RMS value of all the sources related to the +IN and –IN inputs
BASE
METERING IEC 61850 GOOSE ANALOGS
ANALOG INPUT
0.000
ANALOG INPUT
MESSAGE
0.000
ANALOG INPUT 16
MESSAGE
0.000
METERING

WATTMETRIC GROUND FAULT 1(2)

WATT GND FLT 1:
0.000 W
METERING

PHASOR MEASUREMENT UNIT

PMU 1 VA:
0.0000 kV, 0.00°
PMU 1 VB:
MESSAGE
0.0000 kV, 0.00°
PMU 1 VC:
MESSAGE
0.0000 kV, 0.00°
PMU 1 VX:
MESSAGE
0.0000 kV, 0.00°
PMU 1 V1:
MESSAGE
0.0000 kV, 0.00°
PMU 1 V2:
MESSAGE
0.0000 kV, 0.00°
PMU 1 V0:
MESSAGE
0.0000 kV, 0.00°
L90 Line Current Differential System

6.3.7 IEC 61580 GOOSE ANALOG VALUES

1
2
↓
6.3.8 WATTMETRIC GROUND FAULT
6.3.9 PHASOR MEASUREMENT UNIT
PMU 1(4)
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Substituted with zero if delta-connected VTs.
6 ACTUAL VALUES
GE Multilin