Transducer Inputs And Outputs - GE L90 Instruction Manual

6 ACTUAL VALUES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.
PATH: ACTUAL VALUES METERING
DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES METERING
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
GE Multilin
PMU 1 IA:
0.0000 kA, 0.00°
PMU 1 IB:
0.0000 kA, 0.00°
PMU 1 IC:
0.0000 kA, 0.00°
PMU 1 IG:
0.0000 kA, 0.00°
PMU 1 I1:
0.0000 kA, 0.00°
PMU 1 I2:
0.0000 kA, 0.00°
PMU 1 I0:
0.0000 kA, 0.00°
PMU 1 FREQUENCY:
0.0000 Hz
PMU 1 df/dt:
0.0000 Hz/s
PMU 1 CONFIG CHANGE
COUNTER: 0
TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
L90 Line Current Differential System
Range: 0 to 65535

6.3.10 TRANSDUCER INPUTS AND OUTPUTS

DCMA INPUT xx
RTD INPUT xx
6.3 METERING
6
6-21