Advertisement
WM821-M MiniPCI Module
High-power radars are allocated as primary users (meaning they have priority) of the bands
5350 MHz and 5650-5850 MHz
devices.
IMPORTANT NOTE:
This module is intended for OEM integrator only and limited to host with brand:
mart Connect x280n
. The OEM integrator is still responsible for the IC compliance requirement of the end product, which
integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the
host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure lim-
its set forth for a population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's au-
thority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm sepa-
ration with the antenna while this end product is installed and operated. The end user has to be
informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be sat-
isfied. The end user has to also be informed that any changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate this equipment. IC statement
is required to be available in the users manual: This Class B digital apparatus complies with Cana-
dian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following "
".
WM821MHP
iv
—Introduction
and these radars could cause interference and/or damage to LE-LAN
5250-
HP
and model: MediaS-
Contains TX IC:
5005A-
Advertisement
