Linksys WM821-M User Manual page 34

Wireless 802.11n dual-band mini pci module

WM821-M MiniPCI Module

Boost Mode

Enable WMM

Worldwide regulatory domain

DFS Mode

MIMO Powersave

3.6 AutoLink Tab

To enable AutoLink mode, proceed as follows:

1. Toggle the AutoLink button on the Access Point to enable AutoLink mode.

2. Toggle the AutoLink button on the client to enter AutoLink mode.

Figure 38: Access Point Autolink Button

Within 60 seconds, the AutoLink will be completed.

AutoLink is complete.

—Using the Wireless Utility

Select this check box for performance enhancement.

Select this check box to enable/disable the Wireless Multimedia Enhancements (WMM)

feature.

Select this check box to set the regulatory domain

Select this check box to enable Dynamic Frequency Selection (DFS)

Enables/disables the Multiple Input Multiple Output (MIMO) Powersave Mode. Available

options are Off and Static.

Figure 39: Auto Link Tab (Client)

Table of Contents