Advertisement
•
—
.
Auto Switch
Auto Select Authentication modes (Open System or Shared
.
Key, WEP key required)
•
.
WPA-PSK—WPA Pre-Shared Key
•
.
WPA2-PSK—WPA2 Pre-Shared Key
3.2.2.2 EAP Authentication Modes
The WM821-M Configuration Utility currently supports the following EAP authentication modes:
•
.
802.1x (TLS/PEAP)
•
.
WPA (TLS/PEAP/LEAP)
•
.
WPA2 (TLS/PEAP/LEAP)
•
.
CCX (LEAP)
3.2.2.2.1 WPA-PSK/WPA2-PSK SUPPORT
In Infrastructure mode, if WPA-PSK/WPA2-PSK is selected as the Authentication Mode, the encryption method AES or TKIP can be
selected.
Security selection
Figure 13:
Security Tab—WPA-PSK/WPA2-PSK with TKIP
Figure 14:
Enter the network passphrase into the Passphrase and Confirm boxes.
Note
WPA-PSK/WPA2-PSK is not supported in Ad-Hoc network mode.
3.2.2.2.2 802.1X/WPA/WPA2 EAP/TLS SUPPORT
If the 802.1x EAP/TLS option is selected, the encryption method AES or TKIP can be selected, and a certificate is required for the
authentication.
Appendix B Error Messages of Enabler Program
11
Advertisement
