Download Print this page

Linksys WM821-M User Manual page 28

Wireless 802.11n dual-band mini pci module

Advertisement

WM821-M MiniPCI Module
3.3.1 Site Survey—Networks Filter
This section lets you customize which sites are displayed in the Site Survey list:
.
Display Peer-To-Peer stations
.
Display 802.11a Access Points
.
Display 802.11g Access Points
.
Display 802.11b Access Points
3.3.2 Site Survey—List of Detected Stations
This section reports information on the AP stations detected.
Field
Network SSID
MAC Address
Security
CH
Signal
Icons
20
Figure 29:
selecting this check box displays all peer-to-peer (Ad-Hoc) stations within range.
selecting this check box displays all 802.11a APs within range.
selecting this check box displays all 802.11g APs within range.
selecting this check box displays all 802.11b APs within range.
Figure 30: Site Survey-List of Detected Stations
Table 11: List of Detected Stations Description
Description
Network SSID label (i.e., the Network Name). The Network Name is a text string.
MAC address, a hardware address that uniquely identifies each node of a
network
Security enabled or disabled
Channel used by the detected device
Signal strength of the detected device as a percentage
The following icons may be displayed left of the Network SSID:
indicates an 802.11a AP.
—Using the Wireless Utility
Site Survey Tab
An antenna icon with a subscript a

Advertisement

loading