Advertisement
Protocol Tab
Figure 28:
DO NOT CHANGE SETTINGS
If this check box is selected, the protocol setting is not changed when the profile is applied.
USE BELOW SETTINGS
rameters.
Field
Power Save Mode
Preamble (802.11b)
Transmit Rate
Fragment Threshold
Region Code
RTS/CTS Threshold
Reset
3.3 Site Survey Tab
If the Do not change setting check box is not selected, the protocol settings include the following pa-
Table 10: Protocol Tab Description
Description
Sets the power mode. Available options are Continuous Access or Max Power Save. The default set-
ting is Continuous Access.
Sets the Radio Preamble to Auto, Short or Long. This option takes effect only when attaching to an
802.11b network.
The range of the data rate depends on the type of AP that the client card is connected to. The default
setting is Auto Select. MCS index will be allowed to select when the 802.11n Network check box in the
Network Info tab is selected.
Sets the fragmentation threshold (the size that packets are fragmented into for transmission). The de-
fault setting is 2346.
Sets the region code. Available options are FCC (U.S.), IC (Canada), ETSI (Europe), Spain, France,
and MKK (Japan).
Sets the packet size at which the AP issues a Request-To-Send (RTS) or Clear-to-Send (CTS) frame
before sending the packet. The default setting is 2347.
Resets the protocol settings to their default values
Appendix B Error Messages of Enabler Program
19
Advertisement
