Cisco Mds 9000 Family Nx-Os Fundamentals Configuration Guide - Cisco MDS 9000 Series Configuration Manual

Hide thumbs Also See for MDS 9000 Series:
Table of Contents

Advertisement

Using the Cisco NX-OS Setup Utility
when no configuration is present. So setup always assumes system
defaults and not the current system configuration values.
Press Enter at anytime to skip a dialog. Use ctrl-c at anytime
to skip the remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no): yes
The setup utility guides you through the basic configuration process. Press Ctrl-C at any prompt to end the configuration
process.
Step 4
Enter yes (yes is the default) to enable secure password standard
Do you want to enforce secure password standard (yes/no): yes
You can also enable secure password standard using the password strength-check command. A secure password
Note
should contain characters from at least three of the classes: lower case letters, upper case letters, digits, and
special characters.
Step 5
Enter no (no is the default) if you do not wish to create additional accounts.
Create another login account (yes/no) [no]: no
Step 6
Configure the read-only or read-write SNMP community string.
a) Enter no (no is the default) to avoid configuring the read-only SNMP community string.
Configure read-only SNMP community string (yes/no) [n]: no
b) Enter yes (no is the default) to avoid configuring the read-write SNMP community string.
Configure read-write SNMP community string (yes/no) [n]: yes
c) Enter the SNMP community string.
SNMP community string: snmp_community
Step 7
Enter a name for the switch.
The switch name is limited to 32 alphanumeric characters. The default is switch.
Note
Enter the switch name: switch_name
Step 8
Enter no (yes is the default) at the configuration prompt to configure out-of-band management.
Continue with Out-of-band (mgmt0) management configuration? [yes/no]: no
Step 9
Enter yes (yes is the default) to configure the default gateway.
Configure the default-gateway: (yes/no) [y]: yes
OL-29291-02

Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide

Configuring In-Band Management
21

Advertisement

Table of Contents
loading

Table of Contents