Configuring Virtual Terminals; Configuring The Inactive Session Timeout - Cisco MDS 9000 Series Configuration Manual

Configuring Terminal Settings and Sessions
Command or Action
Step 7
stopbits {1 | 2}
Example:
switch(config-com1)# stopbits 2
Step 8 exit
Example:
switch(config-com1)# exit
switch(config)#
Step 9
show line com1
Example:
switch(config)# show line com1
Step 10
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config

Configuring Virtual Terminals

This section describes how to configure virtual terminals on Cisco NX-OS devices.

Configuring the Inactive Session Timeout

You can configure a timeout for inactive virtual terminal sessions on a Cisco NX-OS device.
SUMMARY STEPS
1. configure terminal
2. line vty
3. exec-timeout minutes
4. exit
5. (Optional) show running-config all | begin vty
6. (Optional) copy running-config startup-config
OL-29291-02
Purpose
Configures the stop bits. The default is 1.
Exits COM1 configuration mode.
(Optional)
Displays the COM1 port settings.
(Optional)
Copies the running configuration to the startup
configuration.
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
Configuring Virtual Terminals
75