Cisco Nexus 5000 Series Nx-Os San Switching Configuration Guide - Cisco Nexus 5000 Series Configuration Manual

New and Changed Information
This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS SAN
Switching Configuration Guide, Release 4.2(1)N1(1), and tells you where they are documented.
Table 2: New and Changed SAN Switching Features for Cisco NX-OS Release 4.2(1)N1(1)
Feature
F Port Trunking
F Port Channels
Documentation Organization
As of Cisco NX-OS Release 4.2(1)N1(1), the Nexus 5000 Series configuration information is available in
new feature-specific configuration guides for the following information:
• System Management
• Layer 2 Switching
• SAN Switching
• Fibre Channel over Ethernet
• Security
• Quality of Service
The information in these new guides previously existed in the Cisco Nexus 5000 Series CLI Configuration
Guide which remains available on Cisco.com and should be used for all software releases prior to Cisco Nexus
5000 NX-OS Software Rel 4.1(3). Each new configuration guide addresses the features that are introduced
in or are available in a particular release. Select and view the configuration guide that pertains to the software
installed in your switch.
The information in the new Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide previously
existed in Part 7: SAN Switching of the Cisco Nexus 5000 Series CLI Configuration Guide.
For a complete list of Nexus 5000 Series document titles, see the list of Related Documentation in the "Preface."

Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide

2
Description Changed in Release
Added information about 4.2(1)N1(1)
TF Ports and TNP Ports.
Added information about 4.2(1)N1(1)
F and TF Port Channels.
New and Changed Information
Where to find it
documented...
Configuring Fibre
Channel Interfaces
Configuring SAN Port
Channels
OL-xxxxx-xx