Removing The Configuration For A Missing Module - Cisco MDS 9000 Series Configuration Manual

Removing the Configuration for a Missing Module

Command or Action
Step 3 copy configuration_file
running-configuration
Example:
switch# copy bootflash:start-config.bak
running-configuration
Step 4 copy running-config startup-config
Example:
switch# copy running-config
startup-config
Removing the Configuration for a Missing Module
When you remove an I/O module from the chassis, you can also remove the configuration for that module
from the running configuration.
Note You can only remove the configuration for an empty slot in the chassis.
Before You Begin
Remove the I/O module from the chassis.
SUMMARY STEPS
1. (Optional) show hardware
2. purge module slot running-config
3. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 show hardware
Example:
switch# show hardware
Step 2 purge module slot running-config
Example:
switch# purge module 3 running-config
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
120
Purpose
Copies a previously saved configuration file to the running configuration.
The configuration_file filename argument is case
Note
sensitive.
Copies the running configuration to the start-up configuration.
Purpose
(Optional)
Displays the installed hardware for the device.
Removes the configuration for a missing module from
the running configuration.
Working with Configuration Files
OL-29291-02