Cisco 10000 SIP-600 Installation Manual page 18

10000 series router sip and spa hardware
Table of Contents

Advertisement

Identifying Slots and Subslots for SIPs and SPAs
subslot 1/2
subslot 1/3
Router#
The following example displays information about the 2-port OC12 SPA:
Router#show diag 5/0
Slot/Subslot 5/0:
EEPROM contents, slot 5/0:
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
2-8
SW Version 1.0
Expected Switchover Action: NO ACTION
Product Identifier (PID) : SPA-5X1GE-V2
Version Identifier (VID) : V01
PCB Serial Number
Top Assy. Part Number
Top Assy. Revision
Hardware Revision
CLEI Code
The Transceiver in slot 1 subslot 1 port 0 is ENABLED.
The Transceiver in slot 1 subslot 1 port 1 is ENABLED.
The Transceiver in slot 1 subslot 1 port 2 is ENABLED.
The Transceiver in slot 1 subslot 1 port 3 is ENABLED.
The Transceiver in slot 1 subslot 1 port 4 is ENABLED.
SPA Information:
SPA-5X1GE-V2
SW Version 1.0
Expected Switchover Action: NO ACTION
Product Identifier (PID) : SPA-5X1GE-V2
Version Identifier (VID) : V01
PCB Serial Number
Top Assy. Part Number
Top Assy. Revision
Hardware Revision
CLEI Code
The Transceiver in slot 1 subslot 2 port 0 is ENABLED.
The Transceiver in slot 1 subslot 2 port 1 is ENABLED.
The Transceiver in slot 1 subslot 2 port 2 is ENABLED.
The Transceiver in slot 1 subslot 2 port 3 is ENABLED.
The Transceiver in slot 1 subslot 2 port 4 is ENABLED.
SPA Information:
SPA-5X1GE-V2
SW Version 1.0
Expected Switchover Action: NO ACTION
Product Identifier (PID) : SPA-5X1GE-V2
Version Identifier (VID) : V01
PCB Serial Number
Top Assy. Part Number
Top Assy. Revision
Hardware Revision
CLEI Code
The Transceiver in slot 1 subslot 3 port 0 is ENABLED.
The Transceiver in slot 1 subslot 3 port 1 is ENABLED.
The Transceiver in slot 1 subslot 3 port 2 is ENABLED.
The Transceiver in slot 1 subslot 3 port 3 is ENABLED.
The Transceiver in slot 1 subslot 3 port 4 is ENABLED.
4jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 01:25:03 ago
Card uptime 0 days, 1 hours, 25 minutes, 3 seconds
Card idle time 0 days, 0 hours, 1 minutes, 52 seconds
Voltage status:
Chapter 2
Cisco 10000 Series Router SPA Interface Processor-600
: JAB110202HP
: 68-2616-01
: E0
: 1.1
: CNUIANAAAA
ok
: JAB1042060D
: 68-2616-01
: D0
: 1.1
: CNUIANAAAA
ok
: JAB110202GA
: 68-2616-01
: E0
: 1.1
: CNUIANAAAA
OL-13838-02

Advertisement

Table of Contents
loading

Table of Contents