Table of Contents
Advertisement
Chapter 3
Cisco 10000 Series Router Shared Port Adapters
Table 3-3
Specification
RX overload
Maximum receiver power damage
XFP Port Cabling Specifications
Table 3-4
Table 3-4
XFP Module
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Gigabit Ethernet SPA:
•
•
2-Port Gigabit Ethernet SPA LEDs
The 2-Port Gigabit Ethernet SPA has two types of LEDs. There is an A/L LED for each port and. one
STATUS LED as shown in
Figure 3-5
1
3
The 2-Port Gigabit Ethernet SPA LEDs are described in
OL-13838-02
XFP Module Specifications for 10-Gigabit Ethernet SPA (continued)
shows the port cabling specifications for an XFP module.
XFP Port Cabling Specifications
Wavelength
1310 nm
1550 nm
2-Port Gigabit Ethernet SPA LEDs, page 3-19
SFP Module Cabling and Connection Equipment, page 3-22
Figure
2-Port Gigabit Ethernet SPA Faceplate
1
A/L LED (for each interface)
Two RJ45 (copper) ports
Description
XFP-10GLR-OC192SR: 0.5 dBm
XFP-10GER-OC192IR: –1.0 dBm
XFP-10GLR-OC192SR: +5 dBm
XFP-10GER-OC192IR: +5 dBm
Fiber Type
SMF
SMF
3-5.
2
STATUS LED (for entire SPA)
Table
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
2-Port Gigabit Ethernet SPA Overview
3
SPA-2X1GE
3-5.
2
3-19
Advertisement
Table of Contents
