Table of Contents
Advertisement
Chapter 1
SIP and SPA Product Overview
Table 1-1
SPA
1-port 10-Gigabit Ethernet SPA
2-port Gigabit Ethernet SPA
5-port Gigabit Ethernet SPA
8-port Gigabit Ethernet SPA
2-port channelized OC-12/DS0 SPA
Modular Optics Compatibility
Some SPAs implement small form-factor pluggable (SFP or XFP) optical transceivers to provide network
connectivity. The SFP and XFP modules are fiber-optic transceiver devices that mount to the front panel to
provide network connectivity.
SFP modules are optics modules with speeds lower than 10 gigabits per second (Gb/s); XFP modules are
Note
optics modules with speeds equal to or greater than 10 Gb/s.
Cisco Systems qualifies the SFP modules that can be used with SPAs.
Note
The SPAs accept only the optics modules listed as supported in this document. Each time an SFP or XFP
module is inserted into a SPA, a check is run. Only SFP and XFP modules that pass this check are usable.
Table 1-2
Table 1-2
SPA
1-port 10-Gigabit Ethernet SPA
2-port Gigabit Ethernet SPA
5-port Gigabit Ethernet SPA
OL-13838-02
SIP and SPA Compatibility
shows the types of optics modules that are qualified for use with a SPA.
SPA Optics Compatibility
Product ID
SPA-1X10GE-L-V2
SPA-2X1GE-V2
SPA-5X1GE-V2
SPA-8X1GE-V2
SPA-2XCHOC12/DS0
Qualified Optics Modules—Cisco Part Numbers
XFP-10GLR-OC192SR
•
•
XFP-10GER-OC192IR
•
SFP-GE-T
•
SFP-GE-S
•
SFP-GE-L
•
SFP-GE-Z
•
SFP-GE-T
•
SFP-GE-S
SFP-GE-L
•
SFP-GE-Z
•
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
Modular Optics Compatibility
Minimum Cisco IOS
SIP-600
Software Release
Yes
12.2(33)SB
Yes
12.2(33)SB
Yes
12.2(33)SB
Yes
12.2(34)SB
Yes
12.2(34)SB
1
1-3
Advertisement
Table of Contents
