Honeywell XNX Quick Start Manual page 44

Status Indicator
Current Concentration Level
Figure 31. General Status screen - normal operating mode
The Normal Operating Mode icon
When a warning is triggered, the Warning icon
displayed on the General Status Screen.
If the fault icon is displayed,
display will alternate the display of the target gas concentration and the fault
code.
When an alarm icon
one or both preset alarm levels. The General Status Screen displays the gas
concentration and alarm level exceeded.
In an overrange condition, the alarm icon will display but the target gas
concentration bar graph and alarm setpoints will flash, see illustration below.
Alarm Level Triggered
Figure 35. General Status Overrange - detail
In addition to the graphic Alarm, Fault and Warning
44
(Bar Graph)
Warning Icon
Figure 32. General Status Warning - detail
a fault condition has been triggered and the
Fault Icon
Figure 33. General Status Fault - detail
is displayed, the target gas concentration exceeds
Alarm Icon
Figure 34. General Status Alarm - detail
Full Scale
Concentration
Concentration Bar, Alarm Setpoints Flash
Current Concentration Level
(Numeric)
Full Scale
Alarm 2 Set Point
Alarm 1 Set Point
gives visual indication of proper operation.
appears and information is
Warning Code
Fault Code
Alarm Level Triggered
Target Gas
Concentration
XNX Universal Transmitter Quick Start Guide
Concentration Units
Figure 38. Zero Calibration
Passed