Advertisement
Using the Surveyor's tripod
1. Expand the three legs of the tripod to a stable position; make sure the platform is
close to horizontal.
2. Step on the pedals to push the sharp feet into the ground.
3. Place the Green Auto Leveling Rotary Laser Level on the tripod; holding it in place
with your hand, adjust the direction of the tool to your reference object.
4. While holding the Green Auto Leveling Rotary Laser Level in place with your hand,
align the 5/8" mounting screw in the platform with the screw hole in the bottom
base or side base of the tool.
5. Continuing to hold the Green Auto Leveling Rotary Laser Level in place with your
hand, turn the knob of the mounting screw clockwise to secure the Green Auto
Leveling Rotary Laser Level the tripod platform.
6. Open the three lock levers to unlock the leg extension, adjust the height of the
tripod to your reference.
7. Close the lock levers to lock the leg extension securely. Now you are ready to start
the work.
Leveling rod
This leveling rod can be extended to a maximum of 8 feet. When not in use, it can be
retracted to a length of 3 feet and 2 3/8 inches for storage.
Scales are printed on both surfaces: on one surface, the scales are in increments of
0.25-inch; on the reverse surface, the scales are in increments of 0.24 inch.
To extend the leveling rod, pull the components up.; to retract the, locate and press
each release button (Fig. 27) to unlock the extension and permit the rod to be
retracted.
Advertisement
