Advertisement
Fig. 25
Mount the Green Auto Leveling Rotary Laser Level on the Wall Mounting Base
1. Align the 5/8" screw on the platform with the screw hole in the bottom base or side
base of the tool.
2. Adjust the direction of the tool to your reference object.
3. Turn the screw clockwise to secure the tool on the base.
CAUTION! Whenever using the wall mounting base to secure the Green Auto
Leveling Rotary Laser Level on a stud, be sure to place the tool on the base
carefully, securing it with your hands at all times. Once you are certain that the
tool is attached firmly on the base with the screw, and the base is fastened on the
stud, you can safely remove your hands.
Adjust the Height of the Green Auto Leveling Rotary Laser Level
1. Support the base of the platform with one hand to hold the tool.
2. Turn the securing screw counterclockwise to loosen it.
3. Adjust the height of the platform to the desired position. The platform height is
adjustable up to 11 inches.
4. Tighten the secure screw clockwise to fix the platform firmly.
Advertisement
