Advertisement
Use the top mounted sight to orient the level to your target and to locate the
high and low points within the arc (Fig. 10).
In the main menu, press the arrow buttons
to GRADE (Fig. 11a). Press the
desired x and y axis. (Figs 11b, 11c, 11d, 11e).
In the Grade submenu, use the
or Y axis (Fig. 11a & Fig. 11b). Press the
selected axis, press the
percentage of the grade (Fig. 11c to Fig. 11e). The maximum grade range for
both X axis and Y axis is 8%.
The Grade Percentage can be adjusted at any time while in this mode. The
level will not move the desired grade until after it has self-leveled; allow
ample timefor the level to react to the input provided. Refer to examples in
the illustration below to predict your results (Fig. 12a to Fig. 12d).
To exit Grade Mode, press the
Fig. 10
Fig. 11b
or
button to enter the submenu to select the
or
button to choose the X axis
or
button to reduce or increase the
button, the level will re-level.
Fig. 11a
Fig. 11c
to move the cursor
button again enter the
Advertisement
