Advertisement
8. 5/8'' mounting thread screw – Attaches the Green Auto Leveling Rotary Laser
Level to the base.
9. Balance screw – Adjusts the balance of the base.
Using the Wall Mounting Base
The wall mounting base can be hung from nails or screws on a wall or clamped onto a
beam. By using the wall mounting base, you can easily adjust the height and direction
of the laser to your reference object.
Hang from Nails or Screws:
The base has three mounting holes for secure attachment. Always use three screws
or nails, and make sure that these screws or nails are securely in place in the wall.
Clamp onto a Horizontal Stud
The base can only be attached to a level, horizontal stud; do not try to attach to a
vertical stud.
1. Turn the two lock screws counterclockwise (Fig. 24). Attach the wall mounting
base to a level stud, making sure that the stud is fully inserted into the trough.
Fig. 24
2. Turn the two lock screws clockwise to secure the clamp.
3. Adjust the balance screw until the rubber support touches the wall. Ensure that the
platform is approximately level (Fig. 25).
Advertisement
