Advertisement
Fig. 9a
Fig. 9c
−
ON: The level will automatically re-level when it is bumped or moved.
−
OFF: The level will NOT re-level if it is moved out of level, and will continue to
operate on the non-level plane. Select this option when using an adapter or
mount that allows you to tilt the level to create a diagonal laser line.
−
ADS (Anti-Drift System): The level will signal to the operator that it has been
moved out of level. The laser head will stop rotating and the laser beam will
blink.
NOTE:
OFF and ADS modes are not available when the level is working in the GRADE
mode.
When setting to OFF or ADS mode, allow the level to self-level, wait until the word
"Lock" or "ADS" shows on the LCD before the mode takes effect.
4.
GRADE MODE- Dual or single axis grade
The dual grade function allows more specialized site preparations, such as
road grading and paving), irrigation, trenching, landfills, slopes and
embankments, and laying pipe.
Fig. 9b
Fig. 9d
Advertisement
