Advertisement
Fig. 8c
Fig. 8e
−
Spot mode (Fig. 8b): creates a motionless laser dot for reference, allowing the
level to be used as a straight-line laser.
−
Medium (Fig. 8c): the tool produces a green laser line medium length
−
Short (Fig. 8d): produces a short green laser line.
−
Long (Fig. 8e): the tool sweeps a long green laser line.
Press the
or sweep direction. The laser dot or chalk line can be moved left or right by
pressing the
3.
AUTO LEVEL MODE
In the main menu, press the arrow buttons
to AUTO LEVEL (Fig. 9a). Press the
the desired action. (Figs 9b, 9c, 9d).
The Auto Level Mode determines how the level responds when it is moved out of
level. The Auto level Mode can be set to ON, OFF, or Anti-Drift System (ADS).
button again to enter an additional submenu to change the dot
or
button (Fig. 8f).
Fig. 8d
Fig. 8f
or
button to enter the submenu to select
to move the cursor
Advertisement
