Casio DT-X10M10E Hardware Manual page 27

Dt-x10 series laser scanner integrated models
Table of Contents

Advertisement

Table 3.3 IrDA interface
Item
Comm. speed, modulation
Standard
FIR
MIR
SIR
Emission unit
Peak wave length
Emission strength
Emission angle
Reception unit
Reception wave length
Incident illuminant
Comm. range
Connectable devices
HT-to-HT comm.
Comm. via cradle
Table3.4 Earphone
Item
Method
Connectable device
Table 3.5 Power supply
Item
DT-5023BAT/DT-5025LBAT
Rated voltage
Rated capacity
Operating hours
Data backup hours
Recharge
sub-battery
Sub-battery
Battery type
Rated voltage
Battery low warning
Low main battery voltage
Forcible OFF
Low sub-battery voltage
Specification
IrDA Ver. 1.1 compatible
4 Mbps 4-value PPM modulation
1.152 M, 576 Kbps NRZ modulation
2.4 K to 115.2 Kbps NRZ modulation
880 to 900 nm
Type 75 mW/sr
±15°
850 to 900 nm
SIR: 0.75 mW/cm
FIR: 200 to 0.75, 0.33 to 0.12 mW/cm
0 to 1m (Maximum 25 cm at 4 Mbps)
Between DT-X10 and DT-X10
Bridge Satellite Cradle (DT-160IOE)
Specification
Monaural
Earphone
Specification
3.7 V
1,550 mAh (DT-5023BAT)
3,400 mAh (DT-5025LBAT)
Approx. 8 hours (DT-5023BAT)
Approx. 18 hours (DT-5025LBAT)
Approx. 4 hours (DT-5023BAT)
Approx. 10 hours (DT-5025LBAT)
10 minutes for data in RAM
2 weeks for built-in Real Time Clock
4 days
Button-shape Lithium rechargeable battery
(CR-2032)
3.0 V
VDET1: 3.4 V
VDET2: 3.0 V
VDETS: 2.3 V
27
2
or less
2
Remark
• In case of Wait : Calculation :
Scanning 20:1:1
• For DT-X10M10RC/M10RC2
• In case of Wait : Scanning : Wireless
LAN operation 13:3:4
• At moderate temperature
• Sub-battery is fully charged.
• Period required for the sub-battery
being charged fully when the battery
pack is installed
Warning display, but still operable
Forcible OFF
Data cannot be retained.
Remark
Remark/Condition

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt-x10m10rcDt-x10m10rc2Dt-x10 series

Table of Contents