Status Indication With Leds; Dt-5022Chg (Rapid Battery Charger) - Casio DT-X10M10E Hardware Manual

2.6 Status Indication With LEDs

Various operational statuses on the DT-160IOE can be displayed using the LEDs. The following table describes
LED modes and their meanings.
Table 2.8
LED
Power status indicator
(POWER)
Comm. status indicator
(DATA)
Line status indicator
(LINE)

2.7 DT-5022CHG (Rapid Battery Charger)

Basic Block
Table 2.9
Basic function
Rechargeable battery pack
DT-5023BAT
DT-5025LBAT
AC adaptor
MPC-577ADP
Interface Block
Table 2.10
Item
Input terminals for joint block
1: VIN2
2: VIN3
3: NC
4: GND
Output terminals for joint block
1: VOUT1
2: VOUT2
3: NC
4: GND
No. of joint-able units
Item
DT-X10 is not mounted
DT-X10 is mounted
Power OFF
Break of communication
Communication is in progress
Connection between cradle and PC is not
valid.
No comm. with DT-X10 or abnormality
of the system
Communication is in progress with
DT-X10.
Item
Specification
Rated DC16V Input voltage 8 to 20V
Rated DC16V Input voltage 8 to 20V
NC
GND
DC16V
DC16V
NC
GND
3 units (DT-5022CHG x 3pcs)
Specification
Standard size battery pack
Large-capacity size battery pack
AC100V to 240V input
Output terminal from 1
adaptor is used.
Output terminal from 2
23
Specification
LED ON in red 2-color LED
LED ON in green
LED OFF
LED OFF 2-color LED
LED flash in green
LED ON in red
LED OFF 2-color LED
LED ON in green
Remark
Dedicated batteries only.
Remark
st
unit when AC
nd
unit
Remark