Table 2-54 Sps Configuration Parameters - Honeywell UMC800 Reference Manual

Function Blocks
2.61 SPS Function Block,
Block Properties
Double click on the function block to access the
function block properties dialog box.
Block Order (Read Only)
You can change the assigned execution order
number by selecting "Execution Order" in the
"Configure" menu and arrange the order to suit
your control strategy.
Configuration Parameters
You must configure the SPS Function Block
parameters to the desired value or selection that
matches your operating requirements.
Table 2-54 describes the parameters and the
value or selection.
Properties Group
Block
Failsafe Setpoints
Failsafe Value is the initial value when exiting the program mode. Default Failsafe value is 0.0.
192
continued

Table 2-54 SPS Configuration Parameters

Parameter Index#
Tag Name N/A
N/A
Descriptor
0
1
2
3
4
5
6
7
Function Block Reference Guide
Parameter Description
8 character tag name
Block descriptor
Failsafe Setpoint 1
Failsafe Setpoint 2
Failsafe Setpoint 3
Failsafe Setpoint 4
Failsafe Setpoint 5
Failsafe Setpoint 6
Failsafe Setpoint 7
Failsafe Setpoint 8
Value or Selection
Value in EU
Value in EU
Value in EU
Value in EU
Value in EU
Value in EU
Value in EU
Value in EU
Continued next page
3/99