Table of Contents
Advertisement
Smile Room Connect SRC-10
Installation Instructions
4.1 SCN-10 configuration
The SCN-10 is configured on a PC/laptop using the setup wizard
(see detailed description in the Smile Connect System installation
instructions, MU1H-0603GE51, chapter 4.1).
Plug the USB-LAN adapter into an available USB port on the upper
side of the Smile Connect.
Then connect the USB-LAN adapter via an Ethernet cable to the
network port of the PC/laptop.
Connect the USB-LAN adapter via an Ethernet cable to the network
port of the PC/laptop.
Switch on the PC/laptop and open the browser.
The setup wizard will start automatically in the browser shortly after.
If the setup wizard does not start automatically, then please enter the
address
http://10.0.0.1
in the address bar of the browser.
The SCN-10 Main menu will appear.
15
MU1H-0635GE51 R1016
Advertisement
Table of Contents
