Figure 2-54 Rcon Function Block Example - Honeywell UMC800 Reference Manual

2.52 RCON Function Block,
Usage Tip
The main purpose of this control block is to make a block configuration parameter (constant) available for
display. To do this, you must enter the corresponding parameter index number for the selected configuration
parameter. Select the index number of the required parameter from the specific function block reference
data and enter it in the appropriate field in the "Read Constant Properties" dialog box
RCON Example
Figure 2-54 shows a Function Block Diagram using the RCON function block.
3/99
continued
ATTENTION:
The process variable High Range Value for a PID block (Index #4) may be displayed at
the Operator Panel with the Analog Signal Tag name TC1 PV HI, and/or the process
variable may be used as an input to another control block.

Figure 2-54 RCON Function Block Example

Function Block Reference Guide
Function Blocks
163