Installation - Buffalo WS5600D User Manual

22
UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
23
Serial Number
This sticker shows the TeraStation's serial number.
24
Link LED
Glows orange when the unit is connected to a network.
25
Act LED
This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.

Installation

Note: If using OS X (10.4 or later), download and install "Remote Desktop Connection Client for Mac 2" from http://
www.microsoft.com. For OS X 10.3.9, use version 1.0.3 instead.
1
Connect the TeraStation's Ethernet and power cables and turn it on.
2
Insert the supplied microSD card into your computer. Open the "TeraNavi" folder and double-click TSNavi.exe to
launch TeraNavigator. You can also download the latest version of TeraNavigator from Buffalo's website.
Notes:
• If using Windows 2000 or 2000 Server, make sure that write-protection on the USB device is disabled before
connecting it. To disable write-protection, slide the switch on the USB device toward the USB connector.
• If "Do you want to allow the following program to make changes to this computer ?" is displayed by Windows 8.1,
Windows 8, or Windows 7, click Yes. If "A program needs your permission to continue" is displayed by Windows
Vista, click Continue.
• With Mac OS, double-click the disk image "WS5000-XXX.dmg" (where "XXX" is the software version) from the USB
device and double-click TeraNavigator.
• Disable your antivirus software firewall before continuing. You may not be able to install Buffalo software if
antivirus software or a software firewall are enabled. After you've finished setup, re-enable your firewall or
antivirus software.
8