Lcd Display Settings; Changing The Ip Address - Buffalo WS5600D User Manual

Items
Title
Contents
Test Message

LCD Display Settings

You may configure the LCD on the front of the TeraStation.
1
From the Windows Storage Server Start menu, click Display Settings.
2
Configure the desired settings and click OK.
Items
Show
Scroll Display
LCD Brightness
Night Mode

Changing the IP Address

Note: If the TeraStation is being used in a domain environment, the IP address cannot be changed by NAS
Navigator2. To change the IP address, the domain environment administrator must change it at the domain server.
1
Right-click on your TeraStation's icon and click Properties.
Enter the subject of the notification email.
Email server address: Check "IPv6" to add IPv6 compatibility to the
email notifications.
Select the event that will trigger the notification emails to be sent.
Status report: Sends regular notification emails at the specified time.
Disk error: Sends an email when a hard drive error occurs.
At boot: Sends an email when the system is booted or restarted.
Fan failure: Sends an email when a fan error occurs.
Temperature error: Sends an email when the TeraStation temperature
exceeds normal levels.
Specify event ID: Sends an email when the specified event IDs are
logged. Enter an event ID to trigger email notifications.
Sends a test email to the email address which is configured.
Select the item(s) to be displayed on the LCD display.
If enabled, the LCD scrolls through display items at a regular interval.
Change the brightness of the LCD display from level 1 (darkest) to 5
(brightest).
If checked, the LCD brightness will be set at level 2 (dark) from 6 pm
to 8:59 am the next day.
Note: If the LCD brightness is already set to level 1 (darkest) or level 2
(dark), night mode will be grayed out and cannot be selected.
75
Descriptions
Descriptions