Replication; Buffalo Replication - Buffalo WS5600D User Manual

6
Select the recovery targets and click Next.
7
Step through the wizard to finish.

Replication

Buffalo Replication

Replication copies all data from a share to a share on a different TeraStation. This is an easy way to configure a reliable
system to provide data protection in the event your main TeraStation fails. To configure replication, connect an Ethernet
cable to the LAN port of each TeraStation and follow the steps below.
Notes:
• For best results, use static IP addresses for both replication TeraStations (source and target).
• Replication source data is copied to the replication target folder with a differential overwrite. Data that is not in
the replication source will not be overwritten. Access attributes for the folders and files in the replication source
will not be copied to the replication target.
If you use Buffalo WS5000 or WS5000R2 series TeraStations for the replication source and target, start from step 1. If you
use a different TeraStation as the replication target, refer to that TeraStation's user manual to configure as a replication
target. When you finish configuring, go to step 3.
1
Click TeraStation Backup & Replication Folder Settings in the Start menu on Windows Storage Server.
45