Nas Navigator2 For Mac - Buffalo WS5600D User Manual

The following tasks may be performed from the TeraStation's properties page.
Name
Remote Desktop
IP Address

NAS Navigator2 for Mac

NAS Navigator2 is a utility program that makes it easy to display Windows Storage Server, change the TeraStation's
IP address, or check its hard drive in remote desktop. If you installed the TeraStation with the TeraNavigator, NAS
Navigator2 was installed automatically.
To launch NAS Navigator2, click the
Click on a TeraStation's icon to display:
• Total capacity
• Used capacity
Click Open Remote Desktop to open Windows Storage Server.
Check Use DHCP to assign an IP address automatically. If there is no DHCP server in the
network, you cannot use this function.
Check Renew IP address to obtain an IP address from DHCP server.
You can manually enter an IP address, subnet mask, and default gateway.
icon in the Dock.
Description
79