Default Settings - Buffalo WS5600D User Manual

LCD Message
SYSTEM Error E12
Cooling Failure
HDx Error E16
HDx Not Found
HDx Broken E30
Replace the DISK
SYSTEM I10
TOO HOT !
Operation I12
DEGRADE MODE
RAID I18
X Drive Rebuilding
Replication I33
Replicate Failure
I54
Backup Failure

Default Settings

Administrator's Name
Password
Shared Folders
Description
A rise in the system temperature
may have exceeded the allowable
safety value.
Unable to find hard drive X.
An error occurred, so hard drive X
was removed from the RAID array.
A rise in the system temperature
may have exceeded the allowable
safety value.
Operating in degraded mode.
Rebuilding drive X in the array.
Note: Transfer speeds are slower
during the rebuilding process.
An error occurred during
replication.
A backup job has failed.
Administrator
password
Drives C and D are configured as
administrative hidden shares by Windows
Storage Server's default settings.
Do not place objects in the area around
the TeraStation. Also, move the TeraStation
to a cool location. Make sure that the
TeraStation's fan is working normally.
Hard drive X may be disconnected or may
have failed. After shutting down, reinstall the
hard drive.
Replace hard drive X.
Move the TeraStation to a cool location. Do
not place objects in the area around the
TeraStation.
Check the drive where the error occurred
and replace it with a new hard drive. For
replacing method, refer to the "Hard Drive
Replacement Procedure" section in chapter 5.
Wait until the RAID resynchronization
finishes. It will take about 8–12 hours per
terabyte for a RAID 5 volume and 3–6 hours
per terabyte for a mirrored volume. This
message will disappear when the RAID
resynchronization finishes.
From Buffalo Replication, click Sync to
execute resynchronization. If the error is
displayed again, contact Buffalo technical
support for assistance.
Make sure that the backup job is configured
correctly, and that the NAS is on and not
in standby mode. If the backup job still
fails, check the status of NAS, network, and
backup source and destinations. Also, check
the backup log to see if any errors were
recorded.
82
Corrective Action