Buffalo WS5600D User Manual page 75

• Hard drive read error
• TeraStation booted
• Fan error
• Temperature exceeded
• Specified event ID logged
1
From the Windows Storage Server Start menu, click Email Notification.
2
Check "Enable email notification".
3
Click New and enter an email address. You may enter up to five email addresses to receive notifications.
4
Enter your mail server settings and choose what events will trigger notification. Click Apply to finish the email
notification settings. You can send a test email when clicking Test Message.
Items
Enable email notification
Send to
SMTP Server
Authentication
SSL/TLS
If enabled, email reports will be sent during specific events.
Adds a new receiver for the notification email. Click New to add a new
email address. Click Edit to change the receiver settings or Delete to
remove an address from the list.
Note: Up to 5 email address may be added.
Enter your email SMTP server's address and port number. Port
number 25 is configured by default.
Note: If you choose "None" or "POP before SMTP" for the user
authorization, the port number is locked to "25".
Select the user authorization type from "None", "POP before SMTP",
"LOGIN (SMTP-AUTH/LOGIN)", and "CRAMMD5 (SMTP-AUTH/CRAM-
MD5)". If "POP before SMTP" is selected, enter the POP server address,
port number, username, and password. Unless specified otherwise,
the standard port number (110) is used.
If "LOGIN (SMTP-AUTH/LOGIN)" or "CRAMMD5 (SMTP-AUTH/CRAM-
MD5)" is selected, select whether to use SSL or TLS.
74
Descriptions