Sony DVS-9000 User Manual page 434

2
3
4
434
Color Corrector Functions
The Luminance Process menu appears.
In the <Luminance Process> group, press [Luminance Process], turning it
on.
In the <Mode> group, specify the adjustment mode.
Tint: add a specified color to the original video signal.
Color Modify: adjust the original video signal.
Y Modify: adjust the output levels of the input luminance signal.
When tint mode or color modify mode is selected, skip to step 4.
When Y modify mode is selected, adjust the following parameters.
Knob Parameter Adjustment
1 White White balance adjustment
2 Black Black balance adjustment
3 Y Lift Curvature of curve
4 Y Dark Position of maximum point of
curve
In the <Bound> group, make the settings for the three regions (Dark,
Middle, and Bright).
• [Level] parameters: set the boundaries of the three regions.
Knob Parameter Adjustment
1 Over B Level Luminance level of the Over
Bright point
2 Mid B Level Luminance level of the Bright/
Middle point
3 Dark Mid Luminance level of the Middle/
Level Dark point
4 Under D Luminance level of the Under
Level Dark point
• [Soft] parameters: set the degree of boundary softness of the three
regions.
Knob Parameter Adjustment
1 Over B Soft Degree of softness at Over Bright
point
2 Mid B Soft Degree of softness at Bright/
Middle point
3 Dark Mid Degree of softness at Middle/Dark
Soft point
Setting values
0.00 to 200.00
–100.00 to +100.00
–100.00 to +100.00
–7.31 to +109.59
Setting values
50.00 to 150.00
10.00 to 120.00
–20.00 to +90.00
–50.00 to +50.00
Setting values
15.00 to 70.00
15.00 to 42.50
15.00 to 42.50