Displaying A List Of Transition Rates And Changing The Settings - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Displaying a List of Transition Rates and Changing the

In the Transition menu, for each bank you can display a list of the M/E (or

PGM/PST) transition rates and independent key (or DSK) transition rates, and

change the settings.

These settings are linked to the other transition rate setting operations.

You can also display and set the fade-to-black transition rate.

Displaying the Transition menu

In the menu control block, press the top menu selection button [MISC], then

select VF3 'Transition.'

The Misc >Transition menu appears.

About the Transition menu display

The display of the independent key transition rate in the Misc >Transition

menu depends on the selection in the <Key Transition> group of the

Engineering Setup >Switcher >Transition menu for each of the M/E and PGM/

When [Same] (On direction and Off direction settings the same) is selected

When [Independ] (On direction and Off direction settings independent) is

For more details, see "Settings Relating to Video Switching (Transition

Menu)" in Chapter 20 (Volume 3).

Setting the transition rate in the Transition menu

For example, to make the settings for the M/E-1 bank, use the following

To set the M/E transition rate

Misc Menu Operations

Press [Safe Title] to set it on or off.

in the <Key Transition> group: Only "Key" (or "DSK" in the PGM/PST

bank) appears.

selected in the <Key Transition> group: "Key(On)" and "Key(Off)"

each appear. In the case of the PGM/PST bank, "DSK(On)" and

"DSK(Off)" appear.

In the <M/E-1 Transition Rate> group of the Misc >Transition menu, press

[Transition].