Sony DVS-9000 User Manual page 108

assigned to a mode selection button, so
before use it is necessary to assign to a
mode selection button in the Setup
menu.
b EDIT ENBL (edit enable) button
By pressing this, turning it on, you can
carry out the following operations.
• Effect creation/editing
• Snapshot attribute setting
• Shot box creation/editing
• Macro creation/editing
• Wipe adjustments
• DME wipe adjustments
c Region selection buttons
These select the function block to which
operations apply.
When the mode selection button selection is
EFF/SNAPSHOT/SHOT BOX/MCRO,
you can select multiple region selection
buttons simultaneously. In this case, the
first button pressed lights green as the
reference region, and the other buttons
pressed light amber (the buttons for the
regions shown in the memory recall section
are yellow).
ALL: Selects all regions. When any region
is selected, press this button to unset
the selection of all regions.
DME1 to DME2: Select DME channels.
M/E1, M/E2, P/P: Select the M/E-1, M/E-
2, and PGM/PST regions respectively.
USER4: Selects the USER4 region.
DEV1: Selects the device 1 region.
MORE: Displays buttons in the memory
recall section for regions not assigned
to a region selection button, so that they
can be selected. By default the
following regions are shown on the
memory recall section buttons.
MSTR (master snapshot, master
timeline registers), USER1 to 3,
USER5 to 8, MCRO (macro),
DEV2 (device 2), PBUS, GPI,
RTR(router)
108
Names and Functions of Parts of the Control Panel
To revert the button displays in the
memory recall section, press the
[MORE] button once more, or press the
[EXIT] button that appears in the
memory recall section.
Note that except for the [ALL],
[EXIT], and [MORE] buttons, you can
freely change the assignment to regions
in the Setup menu.
d Alphanumeric display
This shows the selected region name or
register number, and entered numeric
values.
e Memory recall section
This comprises 16 LCD buttons, each with
a display that changes according to the
operating mode.
f Adjustment knob displays
Each of these shows the initial letter of the
parameter that can be adjusted with the
knob to the right, and the setting value
(three digit places, including the minus
sign).
g Adjustment knobs
Use these to adjust the parameters selected
with the memory recall section buttons.