4
5
6
Setting the transition rate by a menu operation
1
2
3
172
Executing a Transition
The button displays in the memory recall section change as shown in the
following illustration, and you can select the type of transition for which
to set the rate.
Press the [KEY1] button.
You can now set the M/E-1 block background transition rate.
Watching the alphanumeric display, enter the transition rate you want to
set with the memory recall section button.
If required, press the [TC] button to switch the input mode (frame count
input or timecode input).
• Enter a value of up to three digits.
• To cancel the input, press any of the mode selection buttons.
Press the [ENTR] button.
In the switcher bank, select first VF7 'Misc', then HF1 'Transition.'
The Transition menu appears.
Select any transition type in the <Transition Type> group.
Turn the knob to set the transition rate.
Knob
Parameter
1
Transition Rate
Adjustment
Setting values
Transition Rate
0 to 999 (frame count)