Sony DVS-9000 User Manual page 601

2nd Ch: Use the 2nd channel video signal.
To select "2nd Ch," it is first necessary to select the second DME on
the keyer using DME.
2
Adjust the following parameters, according to the selected input signal.
• When Flat is selected
Knob
1
2
3
• When Hue Rotation is selected
Knob
1
2
3
Roll settings
There are four modes: H&V, H, V, and Off. You can select the turn position,
the radius of the turned portion, the amount and angle of turning, and the input
video for the front and back pages.
To apply the Roll effect
Display the Roll menu.
The knobs in the Roll menu have the same functions as those in the Page Turn
menu.
For details about operation, see "Page Turn settings" (page 600).
Cylinder settings
You can set the degree of winding onto the cylinder, the radius, the horizontal
position of the wound image, and front and back side output for the image.
To apply the Cylinder effect
With the Cylinder menu displayed, set the following parameters.
Knob
1
2
3
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Speed Speed at which hue changes
Parameter Adjustment
Radius Degree to which image is wound onto
the cylinder
Min R Radius of the cylinder
Offset Horizontal position of the image
wound onto cylinder
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
–12.00 to +12.00
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
DME Special Effect Operations
601