Copying; Loading Paper For Copying; Selecting Paper Tray; Preparing A Document - Dell S3845cdn User Manual

Copying

NOTE:
• When the Authentication or Accounting feature is enabled, a user ID and passcode may be required.
Ask your system administrator for the user ID and passcode.

Loading Paper for Copying

The instructions for loading paper in the paper tray are the same whether you are
printing, faxing, or copying. For details about loading paper, see "Loading Print Media". For
details about setting the paper type and size in the tray, see "Print Media Guidelines".

Selecting Paper Tray

After loading the print media for copy output, select the desired paper tray to be used for
the copy job.
To select the tray:
button, and then select Copy Paper Supply.
1 Press the
2 Select a tray. See "Trays".

Preparing a Document

You can use the document glass or the duplex automatic document feeder (DADF) to
load an original document for copying, scanning, and sending a fax. You can load up to
50 sheets of 80 g/m
time using the document glass.
WARNING:
• Avoid loading documents that are smaller than 5.5 inches by 5.5 inches (139.7 mm by 139.7 mm)
or larger than 8.5 inches by 14 inches (215.9 mm by 355.6 mm), different sizes or weights
together, or booklets, pamphlets, transparencies, or documents having other unusual
characteristics in the DADF.
WARNING:
• Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or
creased paper, curled or rolled paper, torn paper, photographs, or transparencies cannot be used
in the DADF.
WARNING:
• Do not use the documents with staples, paper clips or exposed to adhesives or solvent based
materials such as glue, ink and correcting fluid in the DADF.
NOTE:
• To get the best scan quality, especially for color or grayscale images, use the document glass
instead of the DADF.

Starting the Copy Job

1 Load the document(s).
NOTE:
• See "Loading Documents".
2 Press the
button.
2
(20 lb) documents for one job using the DADF or one sheet at a
235
Copying |