Cleaning The Roller - Honeywell PC42d User Instructions

Chapter 3: Printer Troubleshooting and Maintenance

Cleaning the roller

During maintenance of standard printer, remove, clean and re-install roller in
accordance with the procedure below. Each time you install medium you should check
whether there is debris on the roller. If it is dirty it should be cleaned.
Note: Use of hard or sharp tools to remove jammed labels or other materials is strictly
prohibited. As the roller is highly precise it can be easily damaged.
1. Switch off the printer and remove its power supply;
2. Open the printer's cover by turning the handles on both sides of the printer;
3. Remove the installed medium;
4. Push the spring lock on both sides of the roller inwards such that the roller is
User Instructions for PC42d Desktop Printer
inclined upwards.
33