Medium - Honeywell PC42d User Instructions

LED Status Light (continued)
LED Status
Flickering green light
Rapidly-flickering green light
Stable constantly-lit orange light
Flickering orange light
Flickering red light
Inter-changing flickering red and
green lights

Medium

The printer is capable of printing labels, tags and continuous (receipts and
linered-paper) medium. It also supports direct thermo-sensitive medium. The printing
width supported by PC42d printer is 1-4.33 inches (25-110mm).
User Instructions for PC42d Desktop Printer
Chapter 1: About the Printer
Description
The printer has just been activated.
Printing is suspended. Press the printer button
again to resume printing or press it for 3 seconds
to cancel the printing job.
The printer is communicating.
Simulator (ZSim and ESim) is being activated.
The printer head has over-heated. Wait unit it
has cooled down to acceptable temperature
before resuming printing.
The printer is using the USB thumb drive to
upgrade its firmware.
Remove the USB thumb drive after the LED light
shows stable constantly-lit green light.
The printer is in 'Error' mode. It could be
because: The medium has run out; the printer
head is lifted; printing channel is cluttered with
labels, or paper-feeding test has not be carried
out (press the printer button to print a few test
labels).
Once the error is corrected, press the printer
button again to restart printing.
There is a problem with the printer's hardware.
Send the printer to Honeywell for repair. Please
"Product Services and Repair"
see Page VII
more information.
for
5