Changing Printer Head - Honeywell PC42d User Instructions

Chapter 3: Printer Troubleshooting and Maintenance

Changing printer head

As the printer head undergoes wear and tear as a result of rapid heating and cooling
during the printing process, you would be required to regularly replace it. The duration
between each replacement of the printer head is dependent on many factors, including
the type of images printed, the medium use, the energy volume of the printer head,
printing speed and the room temperature of the room in which the printer is situated.
When the printer is being re-activated, its firmware will check the printer head.
1. Switch off the printer and remove its power supply;
2. Open the printer's cover by turning the handles on both sides of the printer;
3. Simultaneously turn the flexible locking mechanism on both sides of the printer
4. Carefully remove the printer head from the printing mechanism using a cross
5. Use #2 cross screwdriver to remove the ground screw.
User Instructions for PC42d Desktop Printer
head such as to enable the printer head to move forward away from the printing
mechanism.
screwdriver in such a way that the printer head is still be connected to it but only by
way of electric cable and ground screw;
31