Honeywell PC42d User Instructions page 16

Chapter 1: About the Printer
5. Adjust the sensor's position in accordance with the Table below:
Type of Medium
Black Label
Gap
Other media
Move the sensor to the triangular mark on the left of the 'gap' medium
Note:
1. When moving the sensor position, the user would need to re-align the paper;
otherwise the printing position may be inaccurate or paper-feeding may stop because
of incorrect position when pressing the "FEED" button, or flickering red light which is an
indication of irregularity.
2. When a user switches between different types of paper, the user must re-align the
papers each time. Otherwise the printing position may be inaccurate or paper-feeding
may stop because of incorrect position when pressing the "FEED" button, or flickering
red light which is an indication of irregularity.
8
Position of Sensor
Below the Black Mark
Aligned with left triangular mark
Aligned with right triangular mark (default
position)
User Instructions for PC42d Desktop Printer