Table of Contents
Advertisement
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4.
Select Settings > Network > APN.
5.
Click the Add button.
6.
Enter the name of the network service provider and the APN that you obtained from it.
7.
Enter the user name and password, if they are required for the wireless network.
8.
Select the network authentication mode:
•
None. The service provider does not require authentication. This setting is the default
setting.
•
PAP. The service provider uses Password Authentication Protocol (PAP)
•
CHAP. The service provider uses Challenge Handshake Authentication Protocol
(CHAP).
•
PAP or CHAP. The service provider uses either PAP or CHAP.
9.
Change the PDP (data protocol), if necessary:
•
IPV4. The mobile broadband network uses IPv4 only. This setting is the default
setting.
•
IPV6. The mobile broadband network uses IPv6 only.
•
IPV4V6. The mobile broadband network uses either IPv4 or IPv6.
10.
Change the PDP roaming protocol, if necessary:
•
None. The mobile hotspot does not use the specified PDP for roaming. This setting is
the default setting.
•
IPV4. The mobile broadband network uses IPv4 only for roaming.
•
IPV6. The mobile broadband network uses IPv6 only for roaming.
•
IPV4V6. The mobile broadband network uses either IPv6 or IPv6 for roaming.
AirCard 790S Mobile Hotspot
Advanced Settings
86
Hide quick links:
Advertisement
Table of Contents
