Cisco Wireless Ip Phone 8821 And 8821-Ex Multi Charger; Set Up The Multicharger; Install The Multicharger Wall Mount Kit - Cisco 8821 Administration Manual

Cisco Wireless IP Phone 8821 and 8821-EX Multi Charger

Cisco Wireless IP Phone 8821 and 8821-EX Multi Charger
You can charge 6 phones and 6 spare batteries with the Cisco Wireless IP Phone 8821 and 8821-EX Multi
Charger. The following figure shows the multicharger.
Do not use the multicharger in a hazardous environment.
Caution
The multicharger can be placed on a work surface or mounted on a wall with the wall mount kit.

Set Up the Multicharger

The power jack is on the right side of the multicharger.
Procedure
Step 1
Plug the jack end of the power cord into the multicharger.
Step 2 Plug the other end of the power cord into the power adapter.
Step 3 Plug the power adapter into the electrical outlet.
Step 4 Place the multicharger on a stable work surface.

Install the Multicharger Wall Mount Kit

The wall mount kit comes with the following components:
• bracket
• package with 5 screws and 5 self-tapping wall anchors
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
82
Accessories