Cisco Wireless Ip Phone 8821 And 8821-Ex Desktop Charger; Set Up The Desktop Charger - Cisco 8821 Administration Manual

Accessories

Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger

You can charge your phone and a spare battery using the Cisco Wireless IP Phone 8821 and 8821-EX Desktop
Charger. The following figure shows the charger with a phone and a spare battery.
Figure 4: Cisco Wireless IP Phone 8821 and Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger
Do not use the desktop charger in a hazardous environment.
Caution
The desktop charger also allows you to use your phone in handsfree mode.

Set Up the Desktop Charger

You should place the desktop charger on a stable work surface.
Before You Begin
You need the cable that is provided with the charger. This cable has a plug on one end and a USB connector
on the other end.
You need the power adapter that comes with the phone.
Procedure
Step 1 Plug the plug end of the cable into the desktop charger.
Step 2 Plug the USB end of the cable into the power adapter and plug the power adapter into the electrical outlet.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger
79