Cisco Ip Phone Administration Page; Configure The Administration Page For Phone - Cisco 8821 Administration Manual

Configuration on the Phone
Procedure
Step 1 Access the Settings app.
Step 2 Select Wi-Fi.
Step 3 Select a profile.
Step 4
Select Network configuration > IPv4
Step 5 Select Alternate TFTP and set to On.
Step 6 Select TFTP Server 1 and enter the TFTP IP address for the Cisco Unified Communications Manager.
Step 7
Press More
Step 8 In the Trust list window, press More and select Erase.
When you select Erase, the CTL and ITL files are removed from the phone. If you select Continue, the files
remain but you may not be able to connect to the new Cisco Unified Communications Manager.
Step 9 Exit to the home screen.
The phone connects to the Cisco Unified Communications Manager. After the connection is made, the phone
downloads the configuration file and, if necessary, upgrades the firmware to a new firmware load.

Cisco IP Phone Administration Page

Cisco phones that support Wi-Fi have special web pages that are different from the pages for other phones.
You use these special web pages for phone security configuration when Simple Certificate Enrollment Protocol
(SCEP) is not available. Use these pages to manually install security certificates on a phone, to download a
security certificate, or to manually configure the phone date and time.
These web pages also show the same information that you see on other phone web pages, including device
information, network setup, logs, and statistical information.
You can access the administration pages in these ways:
• wireless connection
• direct USB connection
• USB Ethernet dongle

Configure the Administration Page for Phone

The administration web page is enabled when the phone ships from the factory and the password is set to
Cisco. But if a phone registers with Cisco Unified Communications Manager, the administration web page
must be enabled and a new password configured.
Enable this web page and set the sign-in credentials before you use the web page for the first time after the
phone has registered.
Once enabled, the administration web page is accessible at HTTPS port 8443 (https://x.x.x.x:8443, where
x.x.x.x is a phone IP address).
and select Set.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager

Cisco IP Phone Administration Page

69