NEC univerge SV9100 Programming Manual page 873

Issue 4.0
Alarm
Type Report
No.
70 2 0 SIP Stack
Reconfig
Report
71 2 0 CID Buffer
Threshold
72~73 --- Reserved ---
74 2 0 TLS SIP Error
Information
75 --- Reserved ---
76 SIP Server
Keep Alive
Timer
77~79 --- Reserved ---
80 1 0 NetLink start
error.
81 2 0 NetLink call
trouble
information.
SV9100 Programming Manual
Name Content of Alarm
When the number of CID
records is over the limit,
CID buffer threshold alarm
(71) can be reported.
1. License is insufficient 2.
Error in CA Certificate.
2. Error in CA
Certificate.(PRG 84-14-22)
3. Error in Server
Certificate (PRG 10-72-01)
4. Error in Private Key
(PRG 10-72-02)
5. Error in Server
Authentication
a. The cert. not yet valid.
b. The cert. has expired.
c. Self-signed cert.
d. Can't prove server.
The error occurred when
NetLink started.
1. The trouble occurred in
the NetLink relation.
2. The DSP resource was
not acquired at
incoming/outgoing.
Cause Action
1. Encryption
license is not
installed.
2. Failed to validate
CA Certificate.
3. Failed to validate
Server Certificate.
4. Failed to validate
Private Key.
5. Failed to
authenticate
Server.
a and b. The
certificate of PRG
84-14-22 is not yet
valid or is expired.
or the certificate
received from SIP
server is not yet
valid or is expired.
c. The certificate
received from SIP
server is Self-
Signed certificate
and same
certificate is not set
at PRG 84-14-22.
d. Can't prove
server with using a
certificate of PRG
84-14-22
Defective 1. Possibility of
GCD-CP10. defective hardware.
2. Check with maker.
GPZ-IPLE DSP not 1. Confirm wiring and
acquired. system data settings.
2. Check with maker on
uncertain points.
Alarm
Recovery
Status
1. ERR/
REC
2. WAR
3. WAR
4. WAR
5. WAR
ERR
WAR
2-833